Suspension kit Lift 3.5'' Sport ST3 w Falcon SP2 2.1 Monotube TeraFlex - Jeep Wrangler JL 2 Doors
Suspensions Systems deliver true street & trail (ST) performance and capability in a dependable and maintenance-free package. The 3.5” Sport ST3 Suspension System’s higher lift height allows for larger tires and a dominating stance, while maintaining a comfortable and stable ride on both highway and trail. System provide steering geometry correction as well as positive braking control with reduced nose dive. Simple “install and drive” bolt-on installation with no cutting, welding, or alignment required.
Every TeraFlex suspension system is engineered with drivability and performance in mind. Properly developed suspension geometry, roll center, and load tuning ensures that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle.
Mode adjust shocks SP2 give the choice of setting the Falcon shocks base tuning to Performance or Soft/Cold. This choice is made during installation but can be changed later if so desired. You can change the mode by rotating the shaft (lower shock eye).
Modes specs:
* Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
* Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
“High-Value Performance” is the driving force behind our vehicle-specific Falcon shocks for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs.
Fits:
- Jeep Wrangler JL 2 Doors
Specification:
- SP2 mode adjust shocks add Soft and Performance modes
- Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
- Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head tos
- Lift Height:3,5”
- Delivers true Street & Trail (ST) performance
- Dependable performance w/ zero worries
- Positive, responsive handling w/ reduced NVH
- Front (3.5”+) and Rear (2.5”+) Track Bar Brackets correct caster angle, steering geometry, center the axles, and reduce body roll
- Falcon Progressive Front & Rear Bump Stops protect occupants and the vehicle from hard suspension bottoming
- Full range of movement for off-road flex and articulation
- Install and drive, simple bolt-on installation – no welding required
- No alignment require
Includes:
- 3.5” Lift Coil Springs
- Front Control Arm Sport Brackets (TX1938125)
- Front Track Bar Bracket (2.5-3.5” Lift: TX1953250)
- Rear Track Bar Bracket (2.5-4.5” Lift: TX1953600)
- Falcon Progressive Front & Rear Bump Stop Kit (TX1959200)
- 2” Front & Rear Bump Stop Strike Pad Extension Kit (TX1959500)
- 0.5” Front & Rear Bump Stop Strike Pad Shim Kit (TX1959300)
- Longer 11.5” Front Sway Bar Links Kit
- Longer 10.75” Rear Sway Bar Links Kit
- Front Brake Line Anchor Kit (TX1101255)
- Falcon Series SP2 2.1 Monotube
- All necessary hardware
Max Tire Diameter:
- Sport / Sahara : 35” (w/ 3” front & 2.5” rear bump stops)
- Rubicon : 35” (w/ 2” front & 2” rear bump stops)
- Rubicon : 37” (w/ 2.5” front & 3” rear bump stops)
Notes:
- Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels – NOT INCLUDED
- Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires
- Sport/Sahara Fenders require 3” front & 2.5” rear bump stop extension and shims (included) in order to fit 35” tires
- Rubicon Fenders require 2” front & 2” rear bump stop extensions (included) in order to fit 35” tires
- Rubicon Fenders require 2.5” front & 3” rear bump stop extensions and shims (included) in order to fit 37” tires
- Sport Bracket HD Reinforcement Kit (TX1938115) beefs up the Front Control Arm Sport Brackets. Recommended, but not required